Hardware for project review
Review documented hardware by model. Final configuration and project conditions are confirmed before quotation.
LEXUNYU supply
Open reference detail →GT76-CAT1
Photo available on request
- Rechargeable 3.7V polymer battery options 6000/10000/20000mAh
- USB 5V charging port
- GPS+BDS+AGPS+LBS
- IP65 and magnetic installation
- Overseas versions use the A7670E or A7670SA cellular module.
- Dimensions and weight vary by battery option.
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →A300
Photo available on request
- 4G CAT1 · GPS / BeiDou
- Dual CAN (J1939 supported)
- RS485 · RS232 · TTL · spare I/O
- Optional: LIN, RTK, TTS, inertial navigation
- Aluminium IP67 enclosure · external antenna
- Supports temperature, fuel, camera and agricultural sensors (per configuration)
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Optional platform service is available in the EU, Latin America and Middle East; Great Britain excluded. SIM is supplied separately. Warehouse pickup; transit is separate.
Open reference detail →A700FS
Photo available on request
- IP67 and built-in antenna
- 9-90V wide-voltage input
- ACC, G-sensor and relay remote fuel/power cut
- Dual platform and OTA
- BeiDou dual-frequency is mentioned in the source document; confirm for the exact variant
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →C003F-CAT1
Photo available on request
- 4G CAT1; GPS+BDS+AGPS+LBS
- 9-95V vehicle supply and optional 180mAh battery
- 1-Wire and one configurable TTL/RS232/485 serial route; default RS232 stated
- Optional temperature, fuel, iButton and camera peripherals
- A7670E/A7670SA/SIM7070G options
- SOS, low-voltage alarm and relay/ACC lines
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →C003F-CAT4
Photo available on request
- CAT4 variant; confirm specifications for this version. CAT1 specifications do not apply.
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →LD106
Photo available on request
- BeiDou/GPRS and NXP are shown
- Strong magnet and light-sensor tamper indication are shown
- Page shows one or 1-4 reports per day
- Documented temperature range: -40 to 85°C; confirm the exact variant
- 1000 days is a page standby claim, not a field reporting result
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →LD80
Photo available on request
- LD80 is a 4G electronic work badge
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Open reference detail →LD504
Photo available on request
Regular models available · Lead time 15–30 days (excluding transit) · Accessories customized to your project.
Project sourcing — supply to confirm
Open reference detail →Vehicle video recorder
Photo available on request
Third-party references
Open reference detail →Teltonika DualCam
Photo available on request
- The current DualCam page names FMC125, FMC225 and FMC650 as RS232-connected host devices.
- DualCam exposes two channels called front and rear and can send captured data to a server. The reviewed manual shows one main unit mounted on or above the windscreen, but does not establish that the rear channel is an external rear-of-vehicle camera.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →FMC125
Photo available on request
- Named as a DualCam RS232 host.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →FMC225
Photo available on request
- Named as a DualCam RS232 host.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →FMC650
Photo available on request
- Named as a DualCam RS232 host; its two RS232 ports may be used for DSM plus DualCam or DashCam.
- Smart Tachograph Version 2 communication is documented for FMC650; its DDD support requires firmware 03.00.14.rev.07 or later as stated on the page.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →FMC920
Photo available on request
- FMC920 is not named in the current DualCam host list; this is an absence from that page, not proof of technical impossibility.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →DualCam Communication Protocol / sample server
Photo available on request
- The downloadable server is described for initial testing with one or two cameras; multi-device production handling is left to client development.
- The device opens a link to the configured remote server; the server requests a file and controls resume/completion using the documented command flow.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Standard Samsara Camera Connector (ACC-CM-ANLG)
Photo available on request
- The Standard connector page requires RCA or GX12 and CVBS; the English page currently misspells NTSC as 'NSTC', while the matching official Spanish Standard page says NTSC or PAL.
- The documented installation chain uses VG54-NA, CM31/CM32 or CM33/CM34, and two VG USB ports.
- The connector is stated as available only in the UK, US and Canada.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →HD Samsara Camera Connector (AHD1)
Photo available on request
- The HD page accepts CVBS (NTSC or PAL, confirmed in the official Spanish locale) and AHD over the specified male/female GX12 directions.
- The documented chain requires VG54 or VG55, AHD1, a VG cable, a dual or front-facing AI Samsara Dash Cam, and a compatible camera system.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Samsara CM3X-Series Dash Cam
Photo available on request
- The matrix separates native CM3X, Standard connector and HD connector capabilities: both connectors lack third-party audio and AI event detection; Standard is up to SD and lacks parking mode, while HD is up to HD and supports parking mode subject to camera options.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →TachoSync
Photo available on request
- Basic requirements include an account, supported tachograph and tracker, registered company card, card reader, and an always-online computer that can access TachoSync servers.
- The service route supports DDD and also TGD, V1B and C1B selections; exact tachograph identity should still be checked in Tachograph Lookup.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Traccar Server
Photo available on request
- The supported-device directory maps a named device to a protocol and default port; protocol identification uses actual samples and warns that some byte patterns are not unique.
- Most events are server-generated from reported device data; device-originated alarms and fields still depend on model/protocol support.
- The reviewed device list names FMC125, FMC225 and FMC650 under the teltonika protocol. This does not prove DualCam video ingestion or this deployment’s fields.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →FleetCam Essential IOX Connection Cable for Geotab GO9
Photo available on request
- The cable is documented for FleetCam cameras and Geotab GO9 through the GO9 IOX expansion port, providing power, automatic association, and event/video linkage.
- The listing shows Canada and the United States, marks the solution paid, and lists Base, GO, Pro, ProPlus, Regulatory and Third-Party Device plans.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Scorpion S5 installed monitoring package
Photo available on request
- The reviewed installer offers an installed security package. A device-only offer must not be compared as the same monitoring and installation service.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Wialon
Photo available on request
- Wialon lists vehicle video recorder series and video functions. Series-level evidence does not establish this Vehicle video recorder configuration or association with the customer’s existing tracker.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →CMSV6
Photo available on request
- The supplier catalogue names CMSV6; its edition, licence, deployment package and Vehicle video recorder configuration are not established.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Aika168
Photo available on request
- A user identified this viewing platform. Login or menu visibility does not prove fresh-location commands, exact model support or client-platform ownership.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Samsara platform
Photo available on request
- Connector generation, VG gateway, dash camera, licence and country scope must be checked separately.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Samsara VG54-NA
Photo available on request
- Named host in the scoped connector documentation; installed generation, firmware, accessories and service are not confirmed.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Samsara VG54
Photo available on request
- Named host in the scoped connector documentation; installed generation, firmware, accessories and service are not confirmed.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Samsara VG55
Photo available on request
- Named host in the scoped connector documentation; installed generation, firmware, accessories and service are not confirmed.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.
Open reference detail →Geotab GO9
Photo available on request
- Named host in the scoped connector documentation; installed generation, firmware, accessories and service are not confirmed.
Third-party reference model — shown for compatibility planning; not sold by LEXUNYU.